Cool Rides Online®
Results 1 to 2 of 2
  1. #1
    CRO Senior Moderator Gtdhw's Avatar
    Join Date
    May 2011
    Location
    Indiana
    Posts
    1,972
    Achievements & AwardsActivity StatsUser info
    Achievements Wide Open ThrottleAt the Starting LineBuckling UpStepping on the GasBurning Tires
    Awards CRO ChampionCRO ChampionCRO Blog ContributorCRO Featured Ride - June 2011CRO Member of the Week

    Default Tools Explained...

    Had to share...


    Any handyman will recognize the aptness of these explanations.
    Tools Explained

    DRILL PRESS: A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, denting the freshly-painted project which you had carefully set in the corner where nothing could get to it.

    WIRE WHEEL: Cleans paint off bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprints and hard-earned calluses from fingers in about the time it takes you to say, 'Oh shit!'

    SKIL SAW: A portable cutting tool used to make studs too short.

    PLIERS: Used to round off bolt heads. Sometimes used in the creation of blood-blisters.

    BELT SANDER: An electric sanding tool commonly used to convert minor touch-up jobs into major refinishing jobs.

    HACKSAW: One of a family of cutting tools built on the Ouija board principle: It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your future becomes.

    VISE-GRIPS: Generally used after pliers to completely round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand.

    OXYACETYLENE TORCH: Used almost entirely for lighting various flammable objects in your shop on fire. Also handy for igniting the grease inside the wheel hub out of which you want to remove a bearing race.

    TABLE SAW: A large stationary power tool commonly used to launch wood projectiles for testing wall integrity.

    HYDRAULIC FLOOR JACK: Used for lowering an automobile to the ground after you have installed your new brake shoes, trapping the jack handle firmly under the bumper.

    BAND SAW: A large stationary power saw primarily used by most shops to cut good aluminum sheet into smaller pieces that more easily fit into the trash can after you cut on the inside of the line instead of the outside edge.

    TWO-TON ENGINE HOIST: A tool for testing the maximum tensile strength of everything you forgot to disconnect.

    PHILLIPS SCREWDRIVER: Normally used to stab the vacuum seals under lids or for opening old-style paper-and-tin oil cans and splashing oil on your shirt; but can also be used, as the name implies, to strip out Phillips screw heads.

    STRAIGHT SCREWDRIVER: A tool for opening paint cans. Sometimes used to convert common slotted screws into non-removable screws and butchering your palms.

    PRY BAR: A tool used to crumple the metal surrounding that clip or bracket you needed to remove in order to replace a 50 cent part.

    HOSE CUTTER: A tool used to make hoses too short.

    HAMMER: Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod to locate the most expensive parts adjacent the object we are trying to hit.

    UTILITY KNIFE: Used to open and slice through the contents of cardboard cartons delivered to your front door; works particularly well on contents such as seats, vinyl records, liquids in plastic bottles, collector magazines, refund checks, and rubber or plastic parts. Especially useful for slicing work clothes, but only while in use.

    SON-OF-A-BITCH TOOL (or referred to as aTemper Tool): (A personal favorite!) Any tool laying near you that you grab and throw across the garage while yelling 'Son of a BITCH!' at the top of your lungs. It is also, most often, the next tool that you will need.
    If winning was easy, then the losers would be winners.
    I wish I was the man my dog thinks I am.

  2. #2
    CRO Senior Moderator Justa6's Avatar
    Join Date
    Apr 2011
    Location
    PONTIAC, Mich
    Posts
    4,308
    Blog Entries
    3
    Achievements & AwardsActivity StatsUser info
    Achievements Checkered FlagWide Open ThrottleBurning TiresBuckling UpStepping on the Gas
    Awards CRO ChampionCRO Blog ContributorSTA-BIL Featured Ride - May 2011CRO Member of the Week

    Default

    OK Shawn...I wasn't aware you knew where I lived let alone planted spyware in my mancave. I feel soooo violated! LMAO
    Always keep em smokin,,,,then let er drift!


Share This Thread!

Facebook Twitter Google Digg Reddit LinkedIn Pinterest StumbleUpon Email

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Enter our Featured Rides Contest Let Us Show Our Support for You Become a CRO Champion!
Single Sign On provided by vBSSO